Sandwich Box Dimensions

Key Takeaways

Sandwich box dimensions follow the cut: a triangle-cut sandwich needs a wedge whose long sloping face matches the diagonal of the slice, a sub or baguette needs a long rectangular box sized to its length, and a wrap needs height. iBox Factory makes custom sandwich boxes in triangular, tuck top and window styles from 12pt to 18pt board, custom fit to triangles, subs and wraps.

Most sandwich packaging problems are geometry problems. A box that is the right size on paper still fails if its shape does not match how the sandwich is cut. This page covers the numbers for the three common shapes. For choosing board, windows and venting, the sandwiches boxes buying guide goes further.

The wedge: sizing a triangle cut

A sandwich cut corner to corner makes two right-angled triangles. In the classic wedge pack, both halves stand in a triangular box with the cut faces toward the long sloping panel, which is usually where the window sits. That gives three numbers to find:

  1. The two short sides of the triangle match the sides of the slice, plus clearance.
  2. The long sloping side is the slice diagonal. For a square slice, the diagonal is the side length times about 1.41.
  3. The depth of the wedge is the thickness of the two halves together, measured through the filling at its fullest.

Worked example (illustrative only)

Take an example slice of 4.5 inches square. Its diagonal is about 6.4 inches. Add a little clearance and the wedge triangle starts at roughly 4.75 inches on each short side and 6.7 inches on the long side. If two filled halves together measure 2.5 inches thick, the wedge needs about 2.75 inches of inside depth. Loaves vary, so measure your own bread and fillings; these numbers only demonstrate the method.

Subs, baguettes and rolls

Long sandwiches go in a long rectangular box. The iBox custom sandwich boxes page notes that a long rectangular format is the standard choice for baguette and sub sandwiches, built from the specific length and width. Measure the longest roll you serve, including any overhang of filling at the ends, and the height at the thickest point. If you sell half and whole subs, decide whether one long box with an insert can serve both or whether each needs its own size.

Wraps

A wrap cut in half on the diagonal is often packed standing on its cut end so the filling shows. Here the height of the box matters most: measure the tallest half standing up, then size the footprint to hold the halves upright without letting them fall over. A window on the top or front shows the cut face.

Square and rectangular cuts

A sandwich cut straight across, or not cut at all, goes in a tuck top or clamshell-style box sized to the slice plus clearance, with depth set by the filled thickness. The iBox product page describes a standard rectangular format for regular-slice sandwiches and wraps, and a slightly taller format for thick, triple-decker builds.

What the iBox product page lists

ItemListed on the product page
Box typesTriangular sandwich box, tuck top sandwich box, window food box
Board12pt to 18pt SBS, kraft or coated paperboard
DimensionsCustom fit for triangle sandwiches, subs, wraps and fresh deli products
Add-onsPET window, grease-resistant coating, ventilation holes, custom inserts, matte or gloss finish

Catering stacks

For catering, several boxes stack in a bag or on a tray. The product page notes that catering boxes need to hold multiple sandwiches in a stack without compressing each other, so choose a heavier board within the listed range and keep box footprints consistent so the stack is stable.

Ordering sandwich boxes to size

Send the cut, the slice or roll dimensions, the filled thickness, whether you want a window or vents, and the quantity. The die and plates are free, so a box fitted to your bread costs nothing extra in tooling. The minimum is 100 boxes per design, with free design support, free US shipping and a digital proof before printing. Start on the quote form, or browse the custom sandwich packaging and custom food boxes ranges.

Get a Custom Quote

Free die and plates, free design support, free US shipping. Minimums from 100 boxes.